1、HDMI 100M net cable extender based on TCP/IP standard and can use a CAT5e/6 cable to transmit HDMI or DVI-D signals up to 395 feet(120 meters)long. Taking advantage TCP/IP standard, can use net switch to extend high definition video to multiple display. 2、Follow TCP/IP standards, support HDMI 1.3 and provide backward compatibility, conform to HDCP1.1 and 1.2 protocols. 3、Supports point-to-point mode(one HDMI transmitter connected to one HDMI receiver), point-to-multiple mode and cascade connection mode(one HDMI transmitter connected to multiple HDMI receivers via net switch) 4、Support infrared extender function, DVD, TV box and other support IR remote controlled devices can remotely controlled using IR remote controls via HDMI transmitters and HDMI receivers. 5、1）Connect HDMI source(such for DVD/PS3/STB) to transmitter HDMI IN interface using HDMI cable. 2）Connect infrared transmitter to IR TX port of the transmitter and point the infrared transmitter at the infrared receiver of the device you want to control. 3）Connect the receiver HDMI OUT interface to the HDTV/monitor using an HDMI cable. 4）Connect the IR receiver to the IR IN port of the receiver. 5）Using a 120m Cat5e/6 cable to connect the HDMI transmitter and HDMI receiver. 6）Plug two 5V power adapters into the HDMI transmitter and HDMI receiver. 7）Turn on HDTV display and HDMI source Condition: 100% Brand New Item Type: HDMI Extender Material: Metal Color: Black HDMI Resolution: 480p，576p，720p，1080p Audio Sample Rate: 32kHz，44.1kHz，48kHz, 38KHz Infrared Remote Control: for NEC HDMI Version: HDMI 1.3 HDCP Version: HDCP 1.2 Power Consumption: HDMI Transmitter：3W HDMI Receiver: 3W Working Temperature/Humidity: 0-70℃/ 10％-80％RH（Non Condensation） Storage Temperature/Humidity: -10-80℃/ 5％-90％RH（Non Condensation） Weight: Approx. 666g 1 x HDMI Transmitter 1 x HDMI Receiver 2 x Power Adapter 1 x Infrared Transmitter 1 x Infrared Receiver 1 x Manual 2 x Double Sides Adhesive Tape