Features: 1. With its concealed cutter safely design, you only need one-hand operation, easily cut plastic wrap and won't get hurt. 2. Plastic wraps holder and plastic wraps cutter, 2-in-1 funcition. The perfect solutions for cutting plastic wraps. 3. Just "bite": Snap shut, release and remove. 4. Spring loaded, easily pops wrap roll in and out. Safe, concealed cutter is recessed to protect fingers. 5. Easy to store, fits in most kitchen drawers. Notice: 1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow 1-3cm deviation due to manual measurement. 2. I t is forbidden to cut items other than plastic wrap, such as paper, aluminum foil, etc., which will cause the cutter edge to passivate and cannot cut the plastic wrap. Specification: Name: plastic wrap cutting box Size: 35.4*7.1*5.3CM Material: ABS+stainless steel Instructions: 1. Remove one side of the fixed shaft, put on the plastic wrap, reset and press down, pull out the plastic wrap and cover it to complete (note: the fixed shaft hole is facing upwards) 2. With the red slide rail facing upward, the thumb is placed in the middle grooves of the upper cover, and the other four fingers are placed in ring grooves at the back of the base. The thumb is gently pulled and turned up about 45 degrees. 3. Pull the appropriate length of plastic wrap from the middle recess and cover it. Press the upper cover lightly with your thumb. 4. The slider is placed at the bottom of one side of the red sliding rail, and move the slider to the end to cut the plastic wrap. includes: 1 x plastic wrap cutting box