Name:Hydraulic Trim Tilt Pin Wrench Kit Type:Outboard Trim/Tilt Pin Wrench Tool Set Designed torebuild the leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove/install the Trim and Tilt Caps without damage it and the steering cylinder. Fitment:For for Evinrude All MT0004 MT0006 MT0009 Model Name:XLB-1139-S Specification & Application: MT0004 Pins Size:S-4mm MIN Pin Strength:180 ft-lb Tilt Pin Wrench:1/2Inch socket drive Equivalent for Factory Toosl:-06175-2B Fitment: All for Steering Cylinders Trim and Tilt caps for ALL Four Stroke V6 (F200-F300)(3.3L,4.2L) Trim and Tilt Caps for 2 strokes (225-300hp)(Non for VMAX) Tilt Cap ONLY for 2011-Current MT0006 Pins Size:S-4mm/4.5mm MIN Pin Strength:180 ft-lb Tilt Pin Wrench:1/2inch socket drive Equivalent for Factory Toosl:MT0006 - -06175-1A Fitment: Trim Caps for ALL manufactured Trim/Tilt Units Trim Caps for F115-/ for ALL I4 2.8L (F175-F200) Trim Caps for 2-Strokes (115-225hp)/ for ALL VMAX Trim Caps for All Evinrude MT0009 Pins Size:L-6mm MIN Pin Strength:200 ft-lb Tilt Pin Wrench:1/2inch socket drive Equivalent for Factory Tools: -06548 Fitment: Tilt Cap for ALL manufactured Trim/Tilt Units Tilt Cap for F115- (2004-2010)/for ALL I4 2.8L (F175-F200) Tilt Cap for 2-Strokes (115-225hp)/for ALL VMAX Tilt Cap for All Evinrude Colour:As Shown Material:Metal Package Contents: 1set * Hydraulic Trim Tilt Pin Wrench Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.