Features: Cat6/Cat6A Zinc Alloy Gold-Plated keystone jack module is characterised by its anti rust zinc alloy shield for case and its pure copper shielded for protection structure with stable and anti-interference features. Supports network transmission up to 1G 250MHz, perfect for your Gigabt network. 50 Gold-plated on the contacts (Phosphor Bronze material) area, mating cycles > 750 times keystone jack, full shielded, RJ45 to LSA tool free connection. Easy installation, and with adjustable cable clips to make sure any size of cables can be suitable. With transparent insulation pieces inside the houing to avoid "short circuit" problem between the wires ends and the metal housing Specifications: Module:Cat6,Cat6A Color: Silver Material:Phosphor Bronze Wire Clip With Strong Column,Zinc Alloy Gold-Plated Brand:Aucas Product:Cat6/Cae6A FTP Zinc Alloy Module Port:RJ45 Nickle Pin:50U Gold-Plated Plug:>750 Times Connect:>250 Times Port:Support Standard 86 Type Face Plate Test:100% for Fluke Test Approved Size :Length :35mm(1.38in) Width :15mm(0.59in) Heigth :14mm(0.55in) Quantity: 5PCs Quick Installation Guide 1.Put the network cable into the back cover of the module 2.strip the cable about 40mm for naked 3.place the 8 wires to be correct position according to 5688 color code on the cap 4.Cut off the wires end flat with cap 5.Such as the effect picture in the picture 6.put the cap(with placed wires)on the LSA,according to the correct color code on both 7.Lock the housing,if necessary can use a plier to squeeze it to be locked 8.put the nylon cable tie and finish 9.Lose excess tie 10.Connection panel Note: Size for manual measurement, there may be a 0 to 2 for cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 5 x for Cat 6/for Cat 6A Shielded Keystone Modules