Application:1. Apply a layer of base coat.2. Apply 2 layers of black color with a 60" polymerization in-between.3. Apply a regular layer of the 5D Cat Eye color of your choice.4. Bring the magnet close to the surface of the nail and hold it for about 10".5. Cure for 60".6. Apply a layer of Top Coat and cure TIP: Use 2 magnets for a different design.Application:• Make sure that the nail plate is adequately prepared, completely clean, free of cuticles and slightly made rough with a buffer.• Clean the natural nail with Lint Free Pads saturated with pure acetone.• Apply a sufficient amount of Antifungal to the entire natural nail.• Clean again with Lint Free Pads saturated with pure acetone.• Apply a no acid primer - bonder on the entire surface of the natural nail (from the cuticles to the free edge) WITHOUT TOUCHING the area of the cuticles and the lateral folds of the nail.*** The application of the primer is optional • Apply a thin layer of the desired Laloo base (base coat or Graphen base in the color you like).• Polymerize under a Led Lamp for 60'' or a UV Lamp for 120''.• Apply a first thin layer of black or dark color.• Polymerize under a Led Lamp for 60'' or a UV Lamp for 120''.• Apply a second layer of the color of your choice and make sure to apply it properly in order to give full coverage.• Polymerize under a Led Lamp for 60'' or a UV Lamp for 120''.• Apply a layer of 5D Cat Eye of your choice. • Place the magnet at a distance of 3-5mm from the surface of the nail and create the effect you desire.• Polymerize IMMEDIATELY under a LED lamp for 60 seconds or a UV lamp for 120 seconds.• Apply a layer of Top Coat or No Wipe Top Coat or No Wipe Matte Top Coat and polymerize under a Led Lamp for 60'' or a UV Lamp for 120''.TIP: Apply 5D Cat Eye color to one nail at a time for better results *** If you choose a top coat with a sticky surface, you must remove it in the end with Cleaner Ultra Shine Effect by Laloo Cosmetics or a 70 degrees alcoholic lotion without glycerin or oils.*** If you choose a No Wipe Top Coat, you must after the polymerization process leave the customer's hand to "cool" down for 1-1½ minutes so that the polish gives all its shine. • Finally, complete the semi-permanent manicure procedure by applying oils to restore the pH of the nail.REMOVAL1. USING LALOO ACETONE • With a 100/180 file remove the Top Coat layer.• Saturate special wraps for semi-permanent removal (Gel Lack Off) with pure Laloo Cosmetics acetone and wrap each nail separately.• Wait for 4-8 minutes.• With a wooden or metal pusher carefully remove the product, taking extra care not to injure the natural nail.• With a Laloo Cosmetics 100/150 buffer smooth the nail plate and remove any residue.• Using Laloo Cleaner Ultra Shine Effect clean the natural nail.• Hydration is the final stage Moisturize with Dadi Oil in order to restore the pH of the natural nail 2. USING A DRILL Select the appropriate milling bit for your drill and with gentle movements carefully remove the semi-permanent manicure, being careful not to cause damage to the nail plate.ApplicationMultidimensional resultWith the use of more than one color : dare to combine more than 2 shades, creating the most impressive effect. Apply a shade, create the design with the magnet and repeat with a different Cat Eye shade