This auction is a combination set. It has 6 tools for the fox dhx2 and X2 shocks. All tools are made in the USA. They are CNC machined out of 6061 aluminum. This is all the clamps and all the pinned sockets you need to rebuild the fox X2 shock.First we have shock clamp for the FOX float dh x2 and X2. The clamp fits the 3/8" shaft and the inner air sleeve. The 3/8 will not fit older versions of the x2 shocks. Its made for a precision fit. We left plenty of material so there is a lot of clearance when using the 3/8 shaft clamp, and we made it .440 thick to fit into the tight spaces. It is thin enough to fit the version shock. It is the same fit as fox tool number 803-01-690Next we have a wrench for the negative air seal head. Its 9.5" long and has chamfered corners so its easy on your hands. It has a 3/8" square drive so you can torque it to spec, just line the torque wrench up to the line (perpendicular to the wrench) and your good to go. This is the same fit as fox part number 398-00-419. This tool fits - x2 and dhx2 float shocks.Then we have a bearing housing driver, this is the tool on step 12 of the fox float x2 rebuild instructions. This is the same fit as fox tool number 398-00-887. This is used on the fox x2 shocks. It has 4 hardened steel pins and is CNC machined for a great fit. It has a 30mm hex that is plenty tall for a wrench or a crescent.Then we have the REZI vice clamp. It includes the 1.25 inner air sleeve clamp , equivalent to fox part number 803-01-690 and the Rezi body clamp, equivalent of fox 803-01-545 . The rezi body clamp is only used in and the inner air sleeve clamp will fit all fox shocks. The rezi body side of the clamp we left plenty of clearance so you end up with 170 degrees of working room. Clunky clamps can be as little as 90 deprees.Last we have a cartidge cap tools. They have 4 hardened pins that fit both redand blue caps for the dhx2 and X2 shock only. One has has a 3/8" square drive, the other will fit a 5/8 or 16mm socket. It is the same fit as fox tool number 398-00-882 and 398-00-881Shock is NOT included in auction, just the tool. We have several listing of these tools individually or in small sets.<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store