1. Load the battery use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step<br> 2. Put in the grass . It is suggested the length of the grass is more than 5mm, which is more effective.Then tighten the lid.<br> 3. In the model and on the ground table, white is drawn and applied evenly, to sprinkling grass<br> 4. Press the surface of the with the negative electrode electrical connector, as as possible, and then use the grass planter to spraying the grass 2-3cm from the .<br> 5. After the grass is finished, pour out the extra grass or use a model vacuum cleaner to suck it up. the haystack with small scissors and a toothpick until it grows evenly.<br> Material:Metal + Plastic<br> colour:Black<br> Package Contents:<br> 1 x flocking machine (2 x 1.5V batteries not included)<br> 1 x small diameter grille<br> 1 x diameter grille<br> 1 bag x grass<br> 1 x brush<br> 1 x Planting Template Tool<br> Only the above package content, other are not included.<br> Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.