How to Replace a Band Saw Tire: 1. Unplug the band saw, loosen the saw blade tension, and remove the blade. Then remove the band saw wheel. 2. Once removed, completely remove or cut off the old tire and any residue left behind. 3. Place part of the new tire onto the rim, then insert a short rod or pipe between the tire and rim. Roll the pipe around the rim once to evenly stretch and seat the tire. 4. Apply a small amount of adhesive to a brush and spread it evenly on the tire and contact surface. Roll and repeat all the way around the rim. Allow the glue to dry for 24 hours before using the saw. 9-inch Diameter: Designed for 9-inch (230mm) band saws. Compatible with models such as 28-150 BS100 and Grizzly band saws using 1570mm & 1575mm blades. Color: Black Material: Rubber Size: Approximately 12.5mm wide x 3mm thick Package Contents: 2 x Band Saw Rubber Tires Note: The actual color may vary slightly due to lighting and display differences. Measurement may vary by +/- 1-3cm.