Handheld Spot Welder Mini Portable DIY Spot Welding Machine 6 Gear Adjustable Mini Spot Welder with Nickel Sheet & Cable

‏249.00 ₪
ומשלוח חינם

Handheld Spot Welder Mini Portable DIY Spot Welding Machine 6 Gear Adjustable Mini Spot Welder with Nickel Sheet & Cable

  • מותג: Unbranded

Handheld Spot Welder Mini Portable DIY Spot Welding Machine 6 Gear Adjustable Mini Spot Welder with Nickel Sheet & Cable

  • מותג: Unbranded
מחיר: ‏249.00 ₪
נמכר על ידי:
‏249.00 ₪
ומשלוח חינם

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

["★ After receiving the product, please charge it fully before using it to get the best results. This machine can weld 0.1-0.15mm nickel steel sheet and 0.1 pure nickel sheet. It is not to weld pure copper materials with strong conductivity.one full charge can complete the welding of hundreds of solder joints.\n ★This is equipped with 3.7V, 5.5AH lithium battery. After the single-chip microcomputer detects that the soldering pen touches the nickel sheet, it controls the \"MOS\" to turn on. Since the resistance of the soldering pen contacting the nickel sheet is much greater than that of other parts of the loop, most of the energy is concentrated here. The way of heating, the nickel sheet is Consumed, and the nickel sheet is welded to the battery.\n★ When the product is not used for a long for time, the battery power should not be kept too low or too high. If the power consumption is too low, the machine will not work and the charging light will not turn on. When this happens, please charge it, and it will recover after tens of minutes.\n★ Current, voltage, and materials can affect the spot welding effect. Not all materials can get a good spot welding effect. What can now be adjusted is the spot welding for time and contact strength. It is recommended to practice hands with iron cans first, and then solder the battery after getting familiar with the welding machine.\n★[Low Standby Power Consumption]: Long press the spot welding for 3 seconds, the buzzer sounds to complete the on/off operation, low power consumption soft and hard design, the measured current of a few μA when off, low power consumption in standby mode.\n★The product is equipped with a charging cable and no charger for head. Please use a charging for head with a fixed 5V output for charging. Do not use a fast charging for head, otherwise the battery may be damaged.\n★Size: 142*82*40mm"]
  • מזהה Fruugo: 368730460-798662936
  • EAN: 7924016622472

משלוחים והחזרות

שילוח תוך 24 שעות

  • STANDARD: חינם - משלוח בין יום ה׳ 30 אוקטובר 2025–יום ג׳ 04 נובמבר 2025 - חינם

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Shenzhen Yiyuxun Hardware Tools Co., Ltd.
  • Shenzhen Yiyuxun Hardware Tools Co., Ltd.
  • Room 205, Building D10, No. 5, Cengyao Industrial Zone, Yulv Community
  • Yutang Street, Guangming District
  • Shenzhen
  • China
  • 518000
  • cifkdpewjs@163.com

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • Yating He
  • E-CrossStu GmbH
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • Germany
  • 60329
  • E-crossstu@web.de
  • +4969332967674