Remote Control Outlet Eu 16a Mini With Remote Controller Smart Homme Power Socket Wireless Rf 433mhz Plug Description: All remote controlled sockets have been pre-programmed and can be used immediately. To re-program the remote control transmitter and socket receiver, please follow instructions below. Detailed Self- Learning Operation: Re-programming ■Plug the remote controlled socket to a power point and turn the power on. ■Press and hold the power button of the socket receiver for about 3 seconds till the LED indicator on. ■Release the power button. ■Click the left button of the transmitter.Socket programming successful when the LED indicator flashes until it stays on. ■Continue click the right button of the transmitter.Night light programming successful when the LED indicator flashes until it stays on. （Note: The programming interval of the left and right buttons must be less than 8 seconds, otherwise the night light fail to be programmed.） ■ The remote controlled socket is now ready to use. Clear programming ■Plug the remote controlled socket to a power point and turn the power on. ■Press and hold the power button of the socket receiver for about 8 seconds until the LED indicator flashes to go off. ■Release the power button.The clear programming is successful. Specifications: socket receiver Input Voltage: 230V ,50/60Hz Max.load current: 16A Transmission frequency: 433MHz Package Included: 1*socket receiver 1*Remote Control