Specification: Type: Light curing composite resin Shade: A1, A2, A3 Net weight: 2.5g Color: As shown in picture Package includes: 1PC A1/A2/A3 Features: 1. Low polymerization shrinkage 2. High strength and polishability 3. Similar modulus of elasticity to dentin 4. Radiopaque and fluoride releasing 5. Optimal polishability and high shade stability 6. Easy to mold 7. Easy to adhere to bracket for orthodontics 8. Simple and convenient to use 9. Suitable for all types of cavity preparations Usage: 1. Prepare cavities according to standard procedures, remove decayed tissue, and clean the cavity. 2. Apply a dental etchant to the tooth surface to be bonded, rinse thoroughly, and dry the bonding surface. 3. Apply a thin, uniform layer of dental adhesive to the bonding surface and cure with a dental curing light for 20 seconds. 4. After placing and shaping the composite resin, cure with a light source of at least 400mW/cm² for 20 seconds. Curing depth is approximately 1.5mm. For deeper restorations, extend curing time or use incremental layering technique. 5. Perform finishing and polishing. Use dental articulating paper to check occlusion before final adjustments. It is recommended to use rubber polishing points and fine polishing strips. 6. When indicated, use pulp protection materials such as calcium hydroxide (light-cured or self-cured) or other non-eugenol liners. Avoid direct use of eugenol-containing materials as a base.