Size: 29.5*22*3cm Cleaning and maintenance of silicone mold: Before using it for the first time, it can be cleaned with water or detergent to remove surface dust. Before the mold is used for baking, a small amount of butter can be used to coat the inside of the mold. When using continuous molds, if there is an empty tank, add water to the empty tank, and empty burning is prohibited. After each use, it can be soaked in diluted detergent for 10-30 minutes. When cleaning, please use a soft cloth to clean. Do not use rough cleaning balls and other items to clean, so as to avoid scratches and damage to the mold. After cleaning, please dry it and place it in a storage box. Silica gel is prone to electrostatic reaction and will absorb tiny particles and dust in the air. When not in use for a long time, do not directly expose it to the air. When used in an oven, it must be placed in the middle of the oven, and keep a distance of about 10cm from the heating tube and 5cm from the walls of the oven to avoid high temperature damage to the mold. Features of silicone mold products:The main component of Silicone Silicone is silica gel, not rubber or plastic.Silica gel has high flexibility, corrosion resistance, temperature resistance, is suitable for cooking and baking, and is simple and practical.Wide temperature range. The minimum temperature is minus 40 degrees, and the maximum temperature is 230 degrees. It can be heated and frozen evenly.