Three tire repair rubber bands The color is rich, adhesion is sufficient, the life of abrasion is long, and it can have Adheres effectively with rubber tires Tire repair Seven rubber band The refined rubber band has a rich color, strong adhesion, high wear resistance and A longer service life The professional tire repair rubber is small when the tire is repaired, we see that there is a small air leak. Use this tire repair glue to paste the how to use the quick tire repair tool A. First, remove foreign objects on the flat tire . B. Use a screw drill to rotate backwards in the point to be rolled to enlarge the hole. C. Prepare to cut a bit of the tire repair rubber band, tighten the rubber band with a fork drill and apply the glue. D. Drill a large hole and force it in the leak hole. E. Slowly turn the fork drill to remove the fork. F. Using a knife, cut the part of the rubber band exposed outside the tire so that the entire tire repair step is complete. Notes: 1. A helical needle should be used to check the direction of the hole to ensure that the insertion direction and the position of the rubber band correspond to the penetration direction. Otherwise, an air leak will occur. The insertion of the needle must also follow. This slope. 2. After checking that the rubber band is sufficient to penetrate the tire, insert the rotating fork needle into the hole, rotate the rubber strip of a (360 ), then pull it to make sure. That the rubber strip squeeze the broken hole and forms a rotary node in the tire, to prevent air leaks. 3. For deep oblique hole wounds, the length of the rubber band must be ensured so that the rubber strip can enter the tire.