Condition: 100% Brand New_x000D_ Item Type: Pneumatic Paint Sprayer_x000D_ Material: Stainless Steel + Black Diamond _x000D_ Caliber: Approx.0.5mm/0.02in_x000D_ Air Connector Size: Approx.1/4 inch (1.1cm)_x000D_ Capacity: 250ml_x000D_ Working Pressure: 0.25-0.4 (Mpa)_x000D_ Diameter of Spray Hole: Approx. 2mm / 0.1in_x000D_ Paint Spraying Volume: 435 (ml/min)_x000D_ Effective Spray Distance: Approx. 20cm / 7.9in_x000D_ Air Consumption: 5-10 (l/min)_x000D_ Scope of Application: Emulsion paint, primer, finish paint spray_x000D_ Instructions:_x000D_ 1. Pour the paint with good proportion into pot and connect with the feed joint._x000D_ 2. Connect the compressed air to the air inlet connector._x000D_ 3. Pull the trigger and adjust the proper working air pressure (3.5-4.5bar)._x000D_ 4. Adjust the amount of paint and spray width (adjust as needed)._x000D_ 5. Parallel and vertical spray on the cleaning surface (spray distance is about 20cm / 7.9in)._x000D_ Difference Between Upper and Lower Pots:_x000D_ 1. The lower pot S is suitable for spraying horizontally or less than 45 degrees up and down._x000D_ 2. The upper pot G can be rotated, suitable for 360-degree spraying._x000D_ 3. The lower pot have large capacity, and the upper pot have small capacity, chosen according to the usage scenario.