Withstand Voltage:250VWithstand Current:20AContact Resistant:Less than ohmLifetime:More than 1000 Timescolour:blueMaterial:plasticNAC3FCA PowerCON Power In Type A Cable Mount Connector Cable connector, A-type for power-in, screw terminalsThe powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact.It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to a safe power connection.Attention: The powerCON is a connector without breaking capacity, . the powerCON should not be connected or disconnected under load or live!Type A plug and socket is for power IN to a deviceNAC3MPA-1Powercon offers 20 amp rating in a secure-locking, compact housing, and meets all current safety standards. The series offers a 3-pole connection, with pre-mating earth connection and compact design (the series shares many body components with the Speakon' twist-lock loudspeaker connector, though naturally is totally incompatible!). The secure strain-relief chuck cable strain relief accepts cables 5-15mm diameter, and the locking is by the twistlock principle with metal latch (as on current Speakon' connectors).Cable connectors have screw terminals (max. wire size 4mm), panel connectors have ' 4.8 x0.5mm 'spade' terminals. NAC3MP panel connectors have plain mounting holes and are airtight.This means it is impossible to produce a short circuit with correctly wired connectors.Package Contents:1 set x NAC3FCA + NAC3MPA-1 plug (2pcs)Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.