1. Make sure the mounting surface is clean and free of dirt, dust, grease and wax.<br> 2. Wipe the surface with alcohol and allow the surface to dry completely.<br> 3. Remove the back of the adhesive tape and apply it to the cable clip.<br> 4. Remove the remaining backing and stick to the desired surface. Apply pressure on the cable clamp with your thumb and squeeze it for 10 seconds.<br> 5. Don't put any weight on them for a few minutes until the glue really sticks. Insert the cables into the clip and lock it. Avoid moving it frequently.<br> Warm Tips:<br> 1. Please make sure that the surface of the desktop or wall is smooth and dry before use.<br> 2. Do not place the heavy cables to avoid exceeding their load-bearing capacity. In order to improve performance and effectiveness, you can use more cable clamps on the cables.<br> Suitable for Cable Diameter : 6mm / 0.23 inch (maximum)<br> colour:Transparent<br> Material:plastic<br> size:30 x 10 x 10mm<br> Package Contents:<br> 100 x Cable Clips<br> Only the above package content, other products are not included.<br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.