For MatePad SE 11 inch AGS6-W00 Kids Version Compatible LCD Screen with Digitizer Full Assembly Before Installation Notes: 1. Test before installation. When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to electronic components. Wear eye protection and handle glass carefully to avoid injury. 2. Screen replacement is a fragile product. Test before installation. Simulate testing by connecting the motherboard, LCD or screen, cable, and new replacement, then power on. If the test is successful, proceed with installation. If there is no display, contact support immediately. Do not force installation. No responsibility will be accepted after the screen is installed. 3. Do not over-bend the LCD cable. Bending beyond 90 degrees may cause black display. Product Information: 1. LCD display and touch screen digitizer assembly replacement 2. Replaces broken or non-functional screens 3. Restores device appearance 4. Fully compatible and functional 5. Each unit is inspected and in good condition before shipping 6. Professional installation is highly recommended. No responsibility will be accepted after installation.