Features 1、Built‑in high‑brightness 126LED lamp chips, energy saving, uniform light, non‑glaring, suitable for night lighting. 2、Polysilicon solar panel converts solar energy into electricity, which can be fully charged for 12 hours of lighting. 3、With remote control, you can control the switch + radar mode + 2, 3, 4 hours timing + brightness adjustment + automatic mode. 4、It is widely used in squares, parks, gardens, courtyards, streets, sidewalks, campuses, farms, telephone poles, etc. 5、Easy to install, no maintenance or wiring, only need to install on the 4CM mounting pole (mounting pole not included). 6、ABS integrated shell, high hardness, rust‑proof, sealed and waterproof (IP65), dust‑proof and long service life. Specifications Item Type: Street Light Shell Material: ABS Weight: Approx. 1723g / 60.8oz Product Color: Black Power: 200W Number of Lamp Chips: 126LED Color Temperature: 6000K-7000K (Cool White) Control Mode: Switch Button + Radar Control + Remote Control + Light Sensor Control Remote Control Mode: Switch + Radar Mode + 2, 3, 4 Hour Timer + Brightness Adjustment + Automatic Mode Light Status: When people are 5-6m away from the light, high brightness, at other distances, low light display after 30 seconds Sensing Angle: 120 Degrees Recommended Installation Height: 3-5m / 9.8-16.4ft Waterproof Rating: IP65 Irradiation Area: 150m² Working Temperature: -20℃-50℃ Voltage: 3.2V Product Battery Capacity: 15000mAh Product Battery Type: Rechargeable Lithium Iron Phosphate Battery (Included) Product Battery Model: 32650 Battery for Remote Control: 2 x AAA Batteries (Battery Not Included) Solar Panel: Polycrystalline Silicon Solar Panel Sunshine Time: About 10h Fully Charged Lighting Time: 12 Hours Installation Specifications: Mounting rod with a diameter of 4CM (not included) Use Time: ≥50000 Hours Length: Approx. 50cm / 19.7in Width: Approx. 19cm / 7.5in Height: Approx. 6cm / 2.4in Interface Diameter: Approx. 4cm / 1.6in How to Use: 1. Install and maintain only by professionals. 2. Do not install the lamp in a place without sunlight. 3. Fix the mounting pole with a diameter of 4cm on the wall (not including mounting pole), and then install the lamp on the mounting pole to complete the installation. 4. Turn on the switch on the product to turn on the light (light sensor control, the solar panel will only light up in a dark environment, you can confirm whether the light is on in a dark place) 5. The remote control is equipped with 2pcs AAA batteries (batteries not included), and the light switch can be controlled by the remote control + radar mode + 2, 3, 4 hours timing + brightness adjustment + automatic mode Package List 1 x Street Light 1 x Manual 1 x Remote Control (Battery Not Included)