2 in 1 Car Center Console Water Cup Holder Multi-purpose Storage Box 1. Material: ABS, silicone 2. Applicable models: the cup holder is suitable for a size below 108mm, the mobile phone box is suitable for a width below 97mm, and a thickness below 24mm 3. It adopts two-in-one design, which can place mobile phone and water cup at the same time 4. The matching mobile phone box is easy to install, plug and play, and can be removed at any time when not in use 5. There are four elastic silicone sheets inside the cup holder, which can hold most cupsbottles, so that the water cup will not shake when driving on bumpy roads 6. The size of the bottom fixing device can be adjusted to an outer diameter of 100mm, which can be applied to vehicles with larger original cup holders 7. Dimensions: 155x121x161mm 8. Weight: 337 grams Installation notes: 1. Installed in the original car cup holder 2. Find a suitable cup holder, then adjust the cup holder base to a suitable position and put it into the original car cup holder, then turn the cup holder to pop out the fixing key in the base until it is fixed 3. If the original position of the cup holder is not suitable for installation, you can unscrew the screws inside the cup holder, then adjust the screw hole position of the cup holder forward and backward or left and right, and then screw on the screw. Precautions: 1. Do not install in a position that affects driving 2. After drinking water, please tighten the bottle cap to prevent the liquid from shaking out of the bottle when braking suddenly