How To Replace a Band Saw Tire?<br> 1, Unplug the Band saw, loosen the saw blade tension and remove the blade. Then remove the band saw wheel.<br> 2, Once removed, completely remove or cur the old tire and any residue left behind.<br> 3, part of the tire onto the wheel rim, then slip a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tire's elasticity.<br> 4, Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface.Roll and repeat all the way around the rim. Let the glue dry for 24 hours using the saw again.<br> 8 inch<br> Diameter: for 8inch (205mm) bandsaw wheel<br> Suitable for , , HBS20 band saws using 1400mm & 1425mm bandsaw blades.<br> Colour:black<br> Material:rubber<br> Size:about 12.7mm wide x 3mm thick<br> Package Contents:<br> 2 x Band Saw Rubber Tire<br> Only the above package content, other are not included.<br> Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store