How to Replace a Bandsaw Blade Tire: 1. Unplug the bandsaw, release the blade tension, and remove the blade. Then remove the bandsaw wheel. 2. Once removed, completely remove or cut away the old tire and any remaining residue. 3. Slide part of the tire onto the wheel rim, then insert a short rod or pipe between the tire and the wheel. Roll the pipe around the rim once to even out the tire's elasticity. 4. Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface. Roll and repeat all the way around the rim. Allow the glue to dry for 24 hours before using the saw again. 8 Inch Diameter: for 8 inch (205 mm) bandsaw wheels Suitable for , , HBS20 bandsaws that use 1400 mm and 1425 mm bandsaw blades. Color: black Material: rubber Size: about 12.7 mm wide x 3 mm thick Package Contents: 2 x bandsaw blade rubber tires Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.