Protect Swimming Pool WallPool ladder bumper protector can be well fixed at the end of the pool ladder to prevent the metal rod of the ladder from rubbing against the pool vinyl liner or concrete pool wall. It can also prevent water and scum from entering the metal tube of the pool ladder to avoid corrosion. Easy To UseWhich only needs to be inserted into the pipe at the end of the ladder. The extension part at the bottom of pool step rubber cap is thick and large enough to not only protect the inner wall of the swimming pool but also facilitate you to pull them out at any time. Applicable SizeInside Plug--The outer diameter of 2.28 inches is for the base of the rubber ladder bumper, while the inner diameter of 1.81 inches is for the part that plugs into the pool ladder tubing; Outside Cap--The outer diameter of 2.75 inches is for the wider base of the rubber ladder bumper, while the inner diameter of 1.9inches is for the interior part that caps into the ladder tubing. Note: Please measure the diameter of the tube of the swimming pool ladder before purchase to ensure a tight fit. Specifications: Type: Inside Plug / Outside Cap (Optional) Material: Rubber Color: White Quantity: 2PCS Package Size: 140*90*45mm /5.51*3.54*1.77in Package Listing: 2 * Pool Ladder Bumper Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-dadangjia