20PCS 4pin Connector Adapter Cable Clip-on Solderless 5050 RGB LED Strip Light Product Feature： -Max Wattage: 72W max wattage, these connectors can be used for both low and high wattage light strip. -Fireproof Material: Made from PBT material, this light strip connector is heat resistant and anti-burning, which can withstand high temperatures. -Performance: The led light strip can be locked and connected very tightly by the connector. 4 Pin LED Light Strip Connector will not waste space with the wires that connect them, the two strips literally join together right at this connector. -Easy to Use: Open the wire clip. It should snap open with just a little effort. Insert your 10mm LED light strip inside the clip underneath the two contact prongs, making sure the side of the strip aligns with the + symbol. Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit. -Note: 4 Pin For 5050 SMD RGB led strip Non-Waterproof. Please make sure that you put the led strip under the pins and not on top. Please be sure to cut along the suggested line evenly so there is room for a proper connection on each side. How To Use： 1. Open the clip on the side. 2. Slid the 10mm LED light strip inside the clip underneath the two contact prongs. 3. Make sure the side of the strip aligns with the - polarity. 4. Close the wire clip Product Specification： Type：LED Strip Connectors Material：ABS, Magnet, Silicone Working Temperature：0~40℃ Storage Temperature：-20~60℃ Dimension：10mm Package Included： 20 x10mm 4 Pin Light Strip Connector