Features: 1. 7075-T6 material has better fixation and is not easy to deform 2. The design has been changed to a convenient and quick-release fixed base which can be compatible with more models of motors. This structure is more stable and more convenient to replace the motor teeth 3. Two reinforcing ribs are added at the side (special for XRT models), and the motor hole spacing is 25MM and 30MM 4. The fixed at the rear of the motor prevents the motor from moving, effectively protects the motor and the motor from being easily damaged, and is more firmly fixed. 5. It can be adjusted up, down, back and forth, and can be installed with a motor with an outer diameter of 53-70mm (such as motor 2028-5687). If 5687 or shorter motor is installed, it needs to be cut by itself (refer to the instruction diagram for cutting operation) Specifications: Suitable for: for 1/5 6S 77076-4 for 1/5 8S 77086-4 for 1/6 XRT 8S 78086-4 Material: Metal colour: 1-all Blue Package Contents: 1 x Quick Disassembley Motor Mount 1 x motor tail fixed mount Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.