[relateproductdetail/] 3-15mm Conical Feeler Gauge Taper Cone Cylinder Gauge Hole Size Diameter Taper Measure Gauge Features: 1. Material, Made of chrome vanadium steel, miniature and light weight, pocket size and also can ensure the accuracy and stability of long-term use. 2. Welding Taper Gauge, 3-15mm (0.12-0.59inch). Accuracy: 0.1mm/1/64". The total length about 190mm(7.48inch). 3. Applications, Accurate taper throughout the length of the gauge makes it convenient for measuring diameters of small holes, slots etc. 4. With Scales, With imperial scales on one side , this is tool for die makers, machinists and on inspection floors. 5. Polished, bright and clean without burr, rust engraved line and will not rub off . For accurately measuring of cylindrical bores, helping you to get the correct size for repair or replacement of wall wart cords, etc. 6. Simple Operation, Directly insert the aperture gauge into the aperture, groove diameter, and tube inner diameter to measure, and obtain accurate values. 7. Preventing Falling Off, Rolling pattern is adopted, it is not easy to fall off, feel comfortable and increase friction. Specifications: Item Type: Conical Feeler Gauge Material: Chrome Vanadium Steel Color: Silver+Black Range of Measurement: 3-15mm/0.11-0.59'' Total Length: About 190mm/7.48'', Gauge Part With Scale Length: About 132mm/5.19'' Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you Please allow 1-2cm measuring deviation due to manual measurement. 1 X Conical Feeler Gauge [relateproductdetail/]