35X20X3Mm Boron Carbide Sandblasting Nozzle Air Sandblaster Tip for Sandblast Cabinet Tool _x000D_ 35X20X3Mm Boron Carbide Sandblasting Nozzle Air Sandblaster Tip for Sandblast Cabinet Tool _x000D_ _x000D_ _x000D_ _x000D_ Applicable to manual box sandblasting machine and box-shaped automatic sandblasting machine._x000D_ A burst nozzle of the air accelerates and abrasives as the mixture comes out at the end of the tube._x000D_ The cone and the length of the inlet and outlet nozzles determine the pattern and speed of the abrasive exiting the nozzle._x000D_ These spare Sandblasting nozzles are for use in many blasting Cabinet units._x000D_ Operation: _x000D_ 1. The operator inserts the washer nozzle into a contractor nozzle-support nozzle and nozzle screws, turn to hand, until you sit firmly against the washer. _x000D_ 2. with all the related equipment correctly assembled and tested, the operator points the nozzle to the surface to be cleaned and presses the remote control handle to start blasting._x000D_ 3. the operator holds the nozzle 18 at 36 inches from the surface and moves smoothly at a speed that produces the desired cleanliness. Each step should overlap slightly. _x000D_ 4. The operator must replace the nozzle once the orifice is worn 1/16-inches beyond its size. _x000D_ size:35mmx20mmx3mm_x000D_ Material: boron carbide _x000D_ Color: Black _x000D_ Package Contents:_x000D_ 1 * boron carbide nozzle_x000D_ Only the above package content, other products are not included._x000D_ Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm._x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_