360W LED Dimmer Remote Control Box for Single Color LED Strip Light DC12-24V

Product name: IR remote controller dimmerThis product uses infrared remote control. It can adjust brightness and dynamic change modes via the remote control, and supports delay shutdown setting, with memory function. No frequent setup required.Compatible with all kinds of single color LED strip light.Led type: High Power LedInput/Output Voltage: DC12-24VWorking temperature: -20 ~ +60Power: 360WOutput current: 30-36ARemote battery: 2 AAA battery(not include)Control distance: 10mInstruction:1. Insert the strip plug into the controller output socket, align the positive and negative poles of the controller and the strip. Check whether the strip pin position has a short circuit, if there is a short circuit phenomenon please handle it before powering on, otherwise it will damage the controller and LED strip.2. Plug in the power supply, operate the remote control to adjust the controller to work according to needs.3. When installing the infrared remote control controller, install the remote control receiver in a position without obstruction, so as to avoid the malfunction of the remote control.4. Radio frequency models can be remotely controlled through obstacles.Function mode list:1. ON/OFF: power on and off2. SPEED/SPEED+: dynamic speed adjustment3. LINGHT: Maximum brightness4. Up/down: brightness adjustment5. MODE+/MODE-: 8 dynamic modes selection. Gradient, breath, flash, slow flash, quick flash, skip, blink, candle light6. 10%-100%: brightness ratio selection7. Time 5-60: delay shutdown time selectioncolour: white + silverMaterial: plastic + metalPackage Contents:1 x Controller1 x remote control