Features:<br> 1. Transform the IDE hard disk of the recorder to SATA and connect it to the SATA port of the motherboard.<br> 2. Convert 3.5 -inch IDE hard disk to SATA, and connect it to the SATA port of the motherboard<br> 3. IDE optical drive to SATA, connected to the motherboard SATA port<br> 4. Transfer the IDE burner to SATA, then connect it to the SATA port of the motherboard<br> 5. You can transfer the desktop 3.5 -inch IDE hard disk to the SATA recorder (please format the hard disk on the computer first).<br> 6. The transferred hard disk can be used as a master disk or a slave disk (need to reinstall the system, refresh in BIOSS, etc. ).<br> 7. The transferred optical drive can be used as a system.<br> 8. The adapter card supports a parallel port hard disk with a maximum capacity of 1000G.<br> 9. For IDE devices that use adapter cards, the jumper cap must be inserted in the MASTER position.<br> 10. Compatible with SATA 1 generation, SATA 2 generation, SATA 3 generation<br> 11. Plug and play, no driver required<br> Specification:<br> Product size: 6* 2.2CM<br> Product village materials: using PCB double-layer circuit board<br> Scope of use: used for IDE optical drives, burners, 3.5 -inch hard drives, recorder hard drives<br> Compatible system: compatible with windowsXpwin7win8 32-bit64-bit system<br> Packsge list:<br> IDE to SATA adapter card * 1<br> Power cord * 1<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store