and High Quality. Applications:Fabrication, Maintenance and repair, Aerospace, Food and beverage industry, Metal art,Petro/chemical, Shipboard installation/repair Note: If there is a difference in color, it is because the product batch is different, which does not affect the use, please rest to buy Copper material Electrode clip, a very small amount of impurities. Type: welding accessories.Fit For: Tig -17/18/26.Applicable Scope: TIG. packing list: 6 x #10 cups,1 x #4 13N08 Aluminum Oxide Nozzle D6.5mm x 1/4inch,1 x #5 13N09 Aluminum Oxide Nozzle D8.0mm x 5/16inch,1 x #6 13N10 Aluminum Oxide Nozzle D9.50mm x 3/8inch,1 x #7 13N11 Aluminum Oxide Nozzle D11.0mm x 7/16inch,1 x #8 13N12 Aluminum Oxide Nozzle D12.50mm x 1/2inch-,1 x #4 53N58 Aluminum Oxide Nozzle Cup 6.5mm 1/4inch,1 x #5 53N59 Aluminum Oxide Nozzle Cup 8.0mm 5/16inch,1 x #6 53N60 Aluminum Oxide Nozzle Cup 9.5mm 3/8inch,1 x #7 53N61 Aluminum Oxide Nozzle Cup 11.0mm 1/16inch,1 x #8 53N61S Aluminum Oxide Nozzle Cup 12.5mm 1/2inch,1 x 17CB20-1.0 chuck body stubby gas lens,1 x 17CB20-1.6 chuck body stubby gas lens,1 x 17CB20-2.4 chuck body stubby gas lens,1 x 17CB20-3.2 chuck body stubby gas lens,1 x 17CB20G Collet Body for Tig Torch 1.0mm 0.040inch,1 x 17CB20G Collet Body for Tig 1.6mm 1/16inch,1 x 17CB20G collet body for Tig torch 2.4mm 3/32inch,1 x 17CB20G collet body for Tig torch 3.2mm 1/8inch,2 x 10N22S Collets for Tig Torch 1.0mm 0.040inch,2 x 10N23S Collets for Tig 1.6mm 1/16inch,2 x 10N24S Collets for Tig Torches 2.4mm 3/32inch,2 x 10N25S Collets for Tig Torches 3.2mm 1/8inch,1 x 57Y04 short back cup for Tig torch,1 x 57Y03 Medium rear cup for Tig torch,1 x 57Y02 Long Back Cup for Tig Torch,12 x high temperature resistant O-rings),1 x 18CG coaster,1 x 18cgg coaster Colour:Photo Color Material:Metal Package Contents: 1set x TIG welding accessory kit (49pcs) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/ - 1-3cm.