6.5L Ultrasonic Cleaner Timer Ultrasonic Cleaning Machine with Standby Sleep Mode 180WEU Plug 200‑240V 50Hz Item Type: 6.5L Ultrasonic Cleaner Capacity: 6.5L Inner Tank Size: Approx. 300 x 155 x 150mm / 11.8 x 6.10 x 5.91in Shape Size: Approx. 330 x 180 x 310mm / 13.00 x 7.10 x 12.20in Vibrating Head: 3 Ultrasonic Power: 180W Ultrasonic Frequency: 40KHz Heating Power: 300W Drain: 3/8in Water Valve Time Control: Digital LCD Control 1-99 Minutes Temperature Control: 0-80℃ Cleaning Basket: Yes Sound Reduction Cover: Yes Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Application Range: Used for hospitals, medicine, schools, scientific research, petroleum, chemical, light industry, metallurgy, machinery, transportation, national defense and other industries, for instruments, meters, electronic devices, circuit boards, semiconductor silicon wafers, magnetic materials, electroplated parts , Hardware, optical lenses and parts, audio heads, polyester filters, spinnerets, latex molds, jewelry, clock parts, accuracy hardware, bearings, oil nozzles, oil pumps and parts in machinery manufacturing, also ideal for deep cleaning of parts with complex geometric shapes and deep holes, blind holes, and uneven surfaces. When cleaning, choose to add the corresponding cleaning fluid, the cleaning effect is better. How e: 1. Check whether the ground wire and power wire of the ultrasonic cleaner are leaking. 2. Add cleaning fluid to the cleaning tank. When cleaning, the height of the deep liquid level should not be lower than 1/3 of the cleaning tank. When cleaning, please add the corresponding cleaning agent according to different product requirements to ensure the cleaning effect. All cleaning fluid must conform to the non corrosive ultrasonic cleaning machine slot and shell. 3. Insert the power of the ultrasonic cleaner into the socket, turn on the power switch, the indicator light is on, set the regular cleaning time, depending on the liquid level presents bead network fluctuations, and accompanied by vibration, means that the cleaner has entered the normal working state. 4. Set the cleaning temperature according to the cleaning needs (refer to machines with temperature control). 5. Put the cleaning object into the metal cleaning blue, and set the cleaning time according to the degree of fouling of the cleaning object, usually 3 to 30 minutes, especially difficult to clean substances, the cleaning time can be extended appropriately. NO means continuous work, OFF means shutdown. 6. The heavier objects are hung in the cleaning liquid through the hanger to enhance the cleaning effect and improve the cleaning quality (putting directly will affect the cleaning effect). Small objects can be cleaned in glass filled with cleaning fluid. Generally does not affect the cleaning effect. 7. Take out the cleaning material, replace the cleaning fluid and clean again by ultrasonic or directly rinse with water. 8. When not in use for a long time, drain the cleaning fluid in the tank and scrub the body clean.