Feature: 1. This machine is the appropriate size of the ice into the elbow (ice should not be too broken, the size of a piece of ice to just put the elbow overhang Elbow no more than 20mm for the best).  Part of the electric ice machine aluminum alloy as the main material, the surface after a special process.  High quality stainless steel blades made of refined, not easy to wear.  2. The machine also has a beautiful appearance, ice crushing efficiency, simple operation, safety and durability advantages.  Specification: Name: Snow Cone Maker.  Voltage: 220V.  Power: 380W.  Frequency: 50Hz. . Speed: 200 r / min.  Body size: 400 x 180 x 310mm.  Body weight: 5.5KG.  Broken ice volume: 65kg / hr.  Material: Acrylonitrile Butadiene Styrene plastic + aluminum.  We will send you the plug adapter according to your country.   Instruction: 1. Check the power supply voltage is consistent with the voltage indicated on the nameplate, the power supply should be connected to a reliable ground.  2. Lift the ice handle, to the top dead center, plug in the power, turn on the main switch, the ice tray on the chassis, the ice into the broken ice tube. (Note: the amount of ice can not be installed ice broken ice plane) and then depress the ice pressure handle. So that the protection switch automatically opens, play the effect of crushing ice, after the work is completed, lift the pressure ice handle to the top dead center, repeat the above procedures.  Cleaning and maintenance: After the ice machine is used, turn off the switch, unplug the power plug, dry the towel to dry the body of water particles, place a dry place.  Precaution: In use, the ice can not block the export of the outlet, otherwise it will cause the card to disk, burn the motor, such as the above phenomenon, please immediately identify the reasons, cut off the power, lift the handle.  Package Included: 1 x Snow Cone Maker