6HR Electrical Programmable Countdown Timer Socket EU Plug for USB Interface Switch

Function: The socket is ordinary converter, with two output 5V 2A power USB power supply at the same time, can use electrical appliances and recharge the equipment at the same time, such as digital products compatible with iPhone, iPad, MP3, MP4 etc. The charge applies to full range of international AC output, no-load power consumption less than 0.3W, with short circuit, overload, over-voltage protection. Feature: Item Number: TMUSB01 Product Size: 108.5x54x69mm Max load power: 3680W USB port Out Rating: 5V 2.1A Working voltage: 180~260V AC Voltage frequency: 47~63Hz Working current: 16A Time Range: Count down 1hour-10hours IP Level: IP20 Operation Temperature: 0°C to +40°C Time Accuracy: +-3min Shortest Switching Time: 1 hour Timer socket with 2 USB ports 5V 2.1A for charge Plug Type: EU Plug, it applies to Indonesia, Germany, France, Spain, Italy and so on Voltage: AC220V Color: white Material: plastic Timer Control Time Adjustment: 1. Press the power switch 1 time, the 1HOUR LED will light on. The Timer enters ON mode, USB and control socket output ON. 2. Continuously press the power switch the LED light on, the Countdown mode and LED light on will cycle change from 0.25HR, 0.5HR, 1HR, 2HR, 4HR, 6HR. 3. Choose you need countdown time mode, the mode LED will light on, start countdown until countdown time finish, the control output and USB change to OFF. 4. Then the countdown is start, The Time indicate LED will from high to low auto change until Countdown finish off. Failure analysis: 1. Check whether the power supply connection is good 2. Check whether the USB cable is loosen Warning Note: 1. Use indoor and dry location ONLY 2. The load max does not exceed 16A 3680W 3. This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3680 watts 16A 4. Always have earth connection