This is a set of high quality lathe tool holders, excellent profil profiling do semi-finishing and finishing operations. Good strength and hardness, long service life. Good impact strength at low temperatures, improves the surface gloss of cutting elements. Features: Profiling bar do semi-finishing and finishing operations. Good strength and hardness, long service life. It can reduce the cost of grinding the tool and improve cutting efficiency. Good impact strength at low temperatures, improves the surface gloss of cutting elements. Good compressive strength, impact resistance and clear speed advantage in cutting large margin and machining. Practical and diverse processing environments, even in very dirty environments. Carefully open the tool case. To avoid injury, do not touch the edge of the shape. Before using the tool, use safe precautions such as shields and safety glasses. Replace the tool when problems occur, such as noise vibration and flame. Technical data: Name: do turning toolkit Model: MGEHR1010-2 / SER1010H11 / SCLCR1010H06 / SDJCR1010H07 / SDNCN1010H07 / S10K-SCLCR06 / SNR0010K11 Material: 42cr Package Size: 220 * 150 * 40 mm / 8,66 * 5,91 * 1,57 inch Package Weight: 778 g / 1,72 lb No. / model / shank diameter (mm) / overall length (mm) / insert ： 1 MGEHR1010-2 10 100 MGMN200 2 SER1010H11 10 100 11 ER 3 SCLCR1010H06 10 100 CCMT060204 4 SDJCR1010H07 10 100 DCMT070204 5 SDNCN1010H07 10 100 DCMT070204 6 S10K-SCLCR06 10125 CCMT060204 7 SNR0010K11 10 125 11 IR List of packages: 7 * Holders 7 * T8 Klucze 7 * Insoles