Adapter for Small Welding Tanks with 1.5m Hose, 250 Bar, Compatible with Argon and CO2 Refill Stations

‏189.00 ₪
+ ‏59.49 ₪ משלוח

Adapter for Small Welding Tanks with 1.5m Hose, 250 Bar, Compatible with Argon and CO2 Refill Stations

  • מותג: Unbranded

Adapter for Small Welding Tanks with 1.5m Hose, 250 Bar, Compatible with Argon and CO2 Refill Stations

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏419.00 ₪
מחיר: ‏189.00 ₪
החיסכון שלכם: ‏230.00 ₪ (54%)
נמכר על ידי:
‏189.00 ₪
+ ‏59.49 ₪ משלוח

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Please check your tank thread before ordering. OD: 22mm W21.8-14 / DIN477 / M22-14 compatible with CO2 tanks commonly used in Russia, Korea, Japan, UK, France, Switzerland, Sweden, Ukraine, Germany, South Africa, Czech Republic, Singapore, etc. This adapter is designed to refill small Argon or CO2 tanks from larger CO2 cylinders, allowing convenient and efficient tank refills. CO2 Refilling Station Charging Adapter Type: W21.8-14 How it works: 1. Cool the cylinder in the freezer for 1 hour. 2. Attach the CGA320/W21.8 connector to a commercial CO2 gas cylinder. 3. Disconnect the quick connector of the black adapter, then securely tighten the black adapter to the cylinder. Ensure the knob on top of the black adapter is in the highest position. Do not press down the adjustment knob during installation, as pressing the 6mm valve pin will close the valve and prevent CO2 from entering. 4. Reconnect the quick connector. 5. For most large cylinders, stand the cylinder upright or lay it horizontally, depending on internal dip tube configuration. 6. Slowly and carefully open the valve on the gas cylinder. Opening too quickly may restrict flow. A controlled opening allows proper gas flow, which can be heard during operation. 7. After approximately 15–20 seconds, the cylinder will be fully filled. 8. Close the valve on the gas cylinder. 9. Open the bleed screw to release any remaining pressure. 10. Unscrew the CO2 adapter—refilling is complete. Color: Black Material: Metal Package Contents: 1 x Charging Valve Connector Note: Light reflection and different display settings may cause slight variations between the color shown in the image and the actual product. Measurement may vary by +/- 1–3 cm.
  • מזהה Fruugo: 410123453-868400430
  • EAN: 1101063833518

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

אזהרות בטיחות: Do not let your children touch this product alone to avoid swallowing or other injuries.

משלוחים והחזרות

שילוח תוך 24 שעות

  • STANDARD: ‏59.49 ₪ - משלוח בין יום ד׳ 05 נובמבר 2025–יום ו׳ 14 נובמבר 2025

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Qiu Jiateng
  • Wuhan Lili Xing Trading Co., Ltd
  • 9 Jian She 2nd Road, Building 6, Unit, Floor 7, No. 11 Yu Jiang Yi Pin · Qing Shan Yin, Qingshan District, Hubei
  • Wuhan
  • CN
  • 430080
  • jing4808880meif@163.com
  • 15625617190

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149