Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: ±10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Operating Temperature: 90°C Operating Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components. Designed for cleaning and maintaining compressed air system installations. Installation Notes: - Observe correct flow direction during installation; outlet must not be exposed to direct air impact. - Do not use flexible hoses at the outlet. - Ensure power supply voltage matches the drain valve voltage rating. - When using DC power, connect the positive wire to terminal "1". - Wiring: Brown wire is L (live), blue wire is N (neutral), yellow-green wire is safety ground (GND). - Securely tighten the terminal box screws to prevent water ingress and potential damage. Warning: - Ensure compressed air system is fully depressurized before installation. - Disconnect power supply before wiring or maintenance. Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: - The package includes only the items listed above. - Colors may vary slightly due to lighting and monitor display differences. - Allowable measurement error: ±1–3 cm.