This BDC2 adapter is designed for G Series vehicles and is compatible with Key Tool Plus PAD, VVDI2, and other key programming tools. It simplifies key learning and verification by allowing you to install the adapter in the car or use a test bench (compatible with BDC2 test platforms). This eliminates the need for complex power supply and communication setups required for direct on-car programming. If issues arise during key programming that require online coding or initialization, operations can be performed directly on the platform without connecting to the vehicle. The adapter also enables direct inspection of fuse connectors without repeatedly disassembling the BDC.<br><br>Compatible Vehicle List:<br>5 Series (G30/G31/G38) 2016.11-2020.8<br>6 Series (G32) 2017.7-2020.6<br>7 Series (G11/G12) 2015.7-2019.2<br>X3 (G01/G08/F97) 2017.12-2021.8<br>X4 (G02/F98) 2018.4-2021.7<br>M5 (F90) 2017.11-2020.6<br><br>How to Connect:<br>1. Align the 3 positioning pins with the corresponding holes on the chassis.<br>2. Press down firmly on the adapter at the CON7/CON8 locations until fully seated.<br>3. Verify the accurate positioning of the /EEPROM_2/GND pins.<br>4. Slide the adapter to the LOCK position.<br><br>Specifications:<br>Color: As shown<br>Material: PCB<br>Package Contents: 1x BDC2 adapter, 1x cable (for G-Chassis-BDC2)<br><br>Note: The color may vary slightly due to lighting and display differences. Measurement tolerance: +/- 1-3 cm.