1、This is an inductive proximity switch sensor with 2mm detection distance. 2、When the object approaches the sensing area of the switch, the switch can quickly emit electrical commands without contact or pressure required, accurately reflecting the position of the moving object. 3、Quick response, high reliability, strong anti-interference capability. 4、Built-in multiple protection circuits for safety use. 5、Widely used in automatic control system for detecting, positioning control, counting, automatic protection and more. Features: This is an inductive proximity switch sensor with 2mm detection distance. When the object approaches the sensing area of the switch, the switch can quickly emit electrical commands without contact or pressure required, accurately reflecting the position of the moving object. Quick response, high reliability, strong anti-interference capability. Built-in multiple protection circuits for safety use. Widely used in automatic control system for detecting, positioning control, counting, automatic protection and more. Specification: Model: BEM08-02-NK Output Form & Status: NPN NO Detection Distance: 2mm Detection Object: Iron/magnetic metal (Detection distance of non-magnetic metal will reduce) Hole Size: 8mm Cable Length: 1.75m Protection Rating: IP67 Housing Material: Copper nickel plating Control Output: ≤200mA Current Consumption: ≤10mA Response Frequency: 500Hz Indicator Light: Action indicator (red LED) Insulation Resistance: >50MΩ (500VDC megohm reference) Vibration Resistance: 10-55Hz (cycle one minute) amplitude 1mm X, Y, Z 2 hours in each direction Impact Resistance: 500m/s2 (50G) X, Y, Z 3 times in all directions Working Environment: -25~+70℃, 35-95%RH Storage Environment: -30~+80℃, 35-95%RH Protection Circuit: Built-in Surge Protection Circuit, Power Reverse Polarity Protection Circuit, Over Current Protection Circuit Package List: 1 x Inductive Proximity Switch 2 x Nuts 1 x Metal Washer