Features 1、The high‑voltage inverter has a high power of 3‑6v, which can ignite cigarettes and paper immediately, and high frequency, good quality, easy to use. 2、This high‑voltage transformer can be used as a high‑voltage source for high school scientific experiments, electronic instruments and small scientific experiments. 3、High voltage generator can generate high temperature and high frequency arc and easily ignite combustible. 4、This high‑voltage transformer should avoid using electricity under high‑voltage no‑load conditions. 5、The output voltage of the high‑voltage generator is 400000V, please use it under safe conditions. Specification Specifications: Input Voltage: DC 3 V to 6 V Input Current: 2 A - 5 A High Pressure Type: The type of pulse current Output Voltage: 400000V(please pay attention to safety) High Pressure Discharge Distance Between: Approx.10 ~ 20mm / 0.4 ~ 0.8in The Output High Voltage Wire Length: Approx. 100mm / 3.9in Input Power Cord Length: Approx. 100mm / 3.9in (the red line is positive) Wiring: Red and green power connection red line:"+" green line "-" output: the other side ,same color cable Size: Approx. 24 x 22 x 63mm / 0.9 x 0.9 x 2.5in Please Notice: The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. ) Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module Package included: 1 X High Voltage Transformer Package List