Item Type: Brushless Booster Pump Material: Engineering Plastic Water Pump Housing Material: PA66+30% Glass Fiber Magnet Material: Plastic Magnet Wire Frame Material: Nylon Material PA66 Rotor Material: Graphite Power Cord Material: PVC Shaft Material: Ceramic Model: BS-40A Rated Flow: 900m/h Voltage: DC 24V Current: 1.3A Power: 31.2W Starting Voltage: 12V Waterproof Rating: IP68 Rated Head: 8m/26.2ft Use Environment Temperature: -20~80 Use Environment Humidity: Below 90%RH Use Medium Temperature: -20~100 Use Medium: Water, Alcohol, Diesel and Other Liquids with Good Fluidity Use Place: Medical Treatment, Equipment, Electrical Appliances, etc. Life: 30000H Insulation Withstand Voltage Test: 1500V for 60 Seconds Noise: 40dB Purpose: Smart Toilet/Solar Water Heater/Dishwasher Water Pump Package List 1 x BS40A DC 24V Brushless Booster Pump 1. The water pump is a DC water pump, and the voltage must be DC power supply (such as batteries, DC power supplies marked with DC, transformers), and the voltage is within the specified voltage range before it can be used.2. The water pump has its own water& 8209;off protection function. In the absence of water, the pump will automatically stop after 1 minute of rotation. After adding water, re& 8209;insert the power supply to operate normally.3.The water pump has a jam protection device. When impurities enter the pump body during use, after the rotor is jammed, the water pump will automatically stop running. After the power is removed to clean the impurities, the power can be re& 8209;energized.3. It is strictly forbidden to use it in strong acid and strong alkaline solutions.4. It is strictly forbidden to use it in liquids with impurities and magnetic particles larger than 0.25MM. If the water is too dirty, clean up the impurities in the pump room in time. 1The brushless DC motor runs smoothly and has low noise, providing you with a quiet environment. 2This electric water pump can work continuously for up to 20,000 hours, not only that, it also has IP68 waterproof performance. 3It is very suitable for aquariums, fish tanks, fountains and hydroponic systems. 4The submersible pump is made of engineering plastics, which is explosion proof and non sparking. 5It can be disassembled without any tools, easy to separate and easy to clean.