Feature:1. Car's Bluetooth will automatically report the number after the incoming call, and it will automatically answer the number 34 seconds after the number is reported. You can answer the private call with your mobile phone.2. Builtin largecapacity battery, one full charge can be used continuously for 6 hours without interruption, standby time up to 21 days.3. Bluetooth 5.0 chip, support a variety of smart devices with stable signal, effective transmission distance up to 10m or 32.8ft.4. When the car Bluetooth is disconnected from the mobile phone Bluetooth within 510 minutes, the car Bluetooth will automatically shut down.5. The phone can be used as long as it has Bluetooth and is compatible with most smart phone devices.6. For DSP intelligent noise reduction, effectively distinguishing nonhuman voice noise, and automatically reverse eliminate noise, more clear call.Specification:Item Type: Car SpeakerphoneMaterial: ABSColor: As Pictures Shown Weight: Approx. 97g or 3.4ozBluetooth version: Bluetooth 5.0Bluetooth Model: BT-100Battery capacity: 300mAhOperating range: 10 meters or 32.8ftTalk time: 20-24 hoursOutput power: 4WStandby time: About 500 hoursVoice prompt: EnglishCharging time: 2-3 hoursDevice pairing: 8 pairing records can be memorizedModels: suitable for IOS or Samsung or Xiaomi, tablet, laptop and other smart devices with Bluetooth functionHow to use:Pairing: Before using the vehicle-mounted Bluetooth speaker for the first time, it must be paired with a mobile phone that supports Bluetooth function. The vehicle-mounted Bluetooth speaker can be connected with 2 mobile phones at the same time. If you only connect with one phone, you need to connect once. Here are the pairing steps:(1) Put the vehicle-mounted Bluetooth speaker and mobile phone within 1 meter of each other.(2) Enter the pairing mode (it is the pairing mode when the red and blue LED lights flash alternately)Note: The machine will automatically enter pairing mode after starting up.(3) Activate the Bluetooth function of the phone, so that the phone starts to guide the Bluetooth device (refer to the instructions of the phone for details).(4) Select "Yet-Pro6" from the devices found by the mobile phone, and the vehicle-mounted Bluetooth speaker will be paired with the mobile phone. (Password "0000 "is required for pairing of some mobile phones.) After the pairing is successful, the voice will prompt" Complete pairing ", the vehicle-mounted Bluetooth speaker will enter the waiting state, and the blue LED light will flash every 3 seconds.(5) At this time, you can receive and make calls through the car Bluetooth speaker.Note: If the vehicle-mounted Bluetooth speaker is not paired 2 minutes after entering the pairing state, please turn off the vehicle-mounted Bluetooth speaker and pair it again according to the above steps.The car Bluetooth speaker connects the phone(1) Answer the phone: When the phone is called, the vehicle-mounted Bluetooth speaker domain] will emit a ring and voice prompt "incoming call", and short press the "answer" button for once to answer the call.(2) Hang up the call: short press the answer button for one time during the call to hang up the call and the call ends.(3) Automatic call back of the last call number: when the car Bluetooth speaker is on and the last call is made, short answer the "answer button" for two times, then the phone number of the last call will be automatically called.(4) Volume adjustment: When the vehicle-mounted Bluetooth speaker is turned on, press the "- "and "and" keys to adjust the volume until the desired volume is reached..Package List:1 xSpeaker 1 x Clip1 x Charging Cable1 x Manual