Quartz movement is suitable for wall clocks, desk clocks, cross stitch clock, etc. this movement kit is in fine workmanship which make it more solid and durable. The mute watch design is practical. the clock movements kits is easy for installation; Simple and elegant design, these replacement parts suit well to different styles of clock frame. Features - Color: Golden. - Material: Quartz and plastic. - Size: 12 x 6 x 1.5 cm. - Simple elegant design meet all your need. - Easy to install into the clock, is more practical. - workmanship with fine movement of the clock provide precise time. - These replacement parts suit well to different styles of clock frame. - Dear buyer, due to lighting effect, monitor’s brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual . Sincerely hope that you can understand! Thank you! Specification Crystal vibration frequency: 32.768KHz. Average daily poor: ±2sec/day at 1.5v, degree centigrade. Operating voltage: 1.25v to 1.7v. Working temperature: - 10 degree centigrade to 50 degree centigrade. Peripheral output frequency: 0.5hz. Weight: approximately 22g w/o battery. output torque: greater than or equal to 1. -cm(1.5v). Minute needle output torque: greater than 30gf-cm(1.5v). Average power consumption : under 160ua at 1.5v. Second Minute Hour is Second Minute Hour. Length: 130 mm 160mm or less. Weight: 2 or less 6g. Loss torque: Less than or equal to 0.15g-cm 6g-cm. Axial length: 12 mm / 6 mm / 9 mm / 13.5 mm / 16.5 mm / 18.5 mm / 20 mm / 22 mm. Package list: 1 x Clock Movement