Features: Using a universal cross joint structure and a round brass ball in the middle, it has key features such as low rotational sound, small virtual position, and large transmission angle. The spline adopts a six bite design, with high transmission torque, not easily deformed, and low sound. Weight: 79-102/45G; 92-127/50G; 104-150/54G; 114-170/59G; 145-190/65G Note: In the size image, for example, 79-102 represents the hole to hole distance. 85 is the shortest distance reduction. The following are the recommended dimensions for commonly used vehicle models. When selecting the size of the transmission shaft, consider that the length should be slightly longer than the shortest dimension, and it can be used even if it does not fall off at the longest. Due to the manufacturer designing different specifications of transmission shafts according to different vehicle models, highlighting their professionalism! Players choose different transmission shafts based on their own vehicles! Use 79-102 for the front and 92-127 for the back AXIAL series: AXI03006 third-generation pickup truck front 79-102, rear 114-170 AXI03007 Third Generation Wrangler Front 79-102, Rear 92-127 Capra recommends using 92-127 millimeters, the same before and after SCX10 290mm wheelbase is recommended to use 92-127 mm SCX10 305mm wheelbase is recommended to use 92-127mm SCX10 313mm wheelbase recommended to use 104-150mm Second generation frame: AX90047 front 92-127, back 114-170 AX90046 front 79-102, back 114-170 AX90060 front 92-127, back 114-170 AX90058 front 92-127, back 104-150 mm AX90059 front 92-127, back 104-150 mm AX90104 313mm wheelbase is recommended to use front 92-127 and back 104-150mm Ghost suggests using 114-170 millimeters It is recommended to use one 92-127 and one 114-170 each for AX90048 and AX90053, with a shorter front and a longer back AX90075 front 92-127, rear 79-102 AX90074 front 92-127, back 104-150 GMADE R1 suggests using one each of 104-150 and 114-170 RC4WD: The D90 four door version of TF is recommended to use 79-102mm and be sure to use the Jimmy screws provided by RM for fixation It is recommended to use 92-127 millimeters for the two door version, and pay attention to using the Jimmy screws provided by RM for fixation