Compatible with NEO 2 Digital Transceiver Protective Cover

‏139.00 ₪
+ ‏38.99 ₪ משלוח

Compatible with NEO 2 Digital Transceiver Protective Cover

נמכר על ידי:

‏139.00 ₪

חסוך ‏410.00 ₪ (74%)

RRP

‏549.00 ₪
במלאי
+ ‏38.99 ₪ משלוח

מדיניות החזרות ל-14 יום

אמצעי תשלום:

  • מותג: Unbranded

פרטי מוצר

פרטי מוצר

Compatible with NEO 2 Digital Transceiver Protective Cover

Product description 1. Product Name: Drone Transceiver & Antenna Protective Frame 2. Core Material: Lightweight impact-resistant engineering plastic 3. Unit Weight: 30 grams 4. Structural Design: Open slotted vent frame with integrated snap locking latches 5. Primary Function: Outer surface cushioning and scratch protection for rear antenna transceiver hardware 6. Exterior Finish: Matt grey tone matching factory drone body colouring 7. Core Features: (1) Custom moulded outer guard for the exposed rear signal module fitted on drones, adding a thin outer barrier against surface knocks during casual indoor and outdoor recreational flight practice. (2) 1:1 moulded shell follows the exact contour of the drone’s tail antenna assembly for flush close fitting once clipped into place. The slim frame only covers the protruding antenna section and leaves all factory buttons, sensors and propeller guards fully accessible for standard flight operation. (3) Multi-slotted open vent construction creates unobstructed channels for radio signal passage between internal antenna hardware and external receiving equipment, supporting steady image feed transmission during garden and countryside flying activity. (4) Rigid lightweight plastic build delivers mild shock absorption during minor contact with external obstacles, limiting surface abrasion to the delicate transceiver antenna module. The small added frame mass does not shift factory flight balance calibration for consistent hovering and standard battery run times. (5) Integrated internal latch clips secure the shell firmly in place during outdoor flight in light wind conditions. The simple clip mechanism allows quick removal when access to the antenna surface is needed for cleaning or compact drone storage. (6) Slim lightweight antenna guard suited to casual drone flyers, content creators, amateur aerial photographers and new learners conducting indoor practice flights across domestic garden and local green space locations within the UK.
  • מזהה Fruugo: 562936401-1133582370
  • EAN: 783153173400
בטיחות

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

תוויות בטיחות למוצר

CE Mark
אזהרות בטיחות: WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
מרכיבים: Octinoxate 5.4863%
מספר חלק של היצרן: JT202627
מספר דגם: JT199530
מספר סידורי: JT062027
מספר אצווה: JT196638

משלוח

מְסִירָה

שילוח תוך 3 ימים

  • STANDARD: ‏38.99 ₪ - משלוח בין יום ה׳ 03 דצמבר 2026–יום ו׳ 11 דצמבר 2026

משלוח מ- סין.

החזרות

החזרות

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים.

הצג מדיניות ההחזרים המלאה