Crimping Tool SN-28B for Pin Socket Terminal - Precision Crimper for JST-SM & Dupont Connectors

‏159.00 ₪
+ ‏23.49 ₪ משלוח

Crimping Tool SN-28B for Pin Socket Terminal - Precision Crimper for JST-SM & Dupont Connectors

  • מותג: Unbranded

Crimping Tool SN-28B for Pin Socket Terminal - Precision Crimper for JST-SM & Dupont Connectors

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏229.00 ₪
מחיר: ‏159.00 ₪
החיסכון שלכם: ‏70.00 ₪ (30%)
נמכר על ידי:
‏159.00 ₪
+ ‏23.49 ₪ משלוח

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Easy to use: Wheel adjustment to control the crimping force of the handle. Function: This crimping tool is commonly used to crimp male and female pins on 18-28 AWG wires to make custom made cables. Unique design: The crimping tool adopts ratchet - connecting rod structure automatic buckle locking type force, convenient and practical. Compact size : Ergonomic handle, comfortable to hold. : 100 percent brand new and high. Features: Easy to use: Wheel adjustment to control the handle crimping force. Function: This crimping tool is commonly used to crimp male and female pin crimps on 18-28 AWG wires to make custom cables. Unique design: The crimping tool adopts ratchet - automatic buckle lock type force connecting rod structure, convenient and practical. Compact size: Ergonomic handle, comfortable to hold. : 100 percent New and High. Specification: Condiiton: 100 percent New Color: BlueandBlack Material: Ni-Cr Alloy Steel Size: (L) x (W) 190 x 150mm or 7.48" x 5.51" (appr.) How to use : 1. If on a roll, do not cut the stems, leave them until the wire is crimped. Prepare the wire by stripping approximately 1 or 8" (3 mm) of insulation from the end. Place the wire into the crimp pin, aligning so that the stripped portion is between the inner set of tabs on the crimp rod, while the insulated wire is between the outer set of tabs . 2.In your crimp pins are too short for this method.see the bottom of these instructions for an alternative. Place the wire and crimp pin on the appropriate tooth of the tool die, making sure the insulated end is on the raised, wider half of the tooth. Tabs should point towards the cavity on the other side of the die so that the tool bends them inward around the wire as it closes. 3.Slowly and fully close the jaws of the tool until they release. The tabs on a properly crimped pin should form a barrel around the lead wires and another strain relief cylinder around the
  • מזהה Fruugo: 390933479-837282941
  • EAN: 9775774602538

משלוחים והחזרות

שילוח תוך 2 ימים

  • STANDARD: ‏23.49 ₪ - משלוח בין יום ה׳ 06 נובמבר 2025–יום ו׳ 14 נובמבר 2025

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Bloom & Breeze
  • Shenzhen Aining Cultural And Creative Co., Ltd.
  • Room B1504, Nanshan Software Park, No. 10128, Shennan Avenue, Liancheng Community, Nantou Sub -district, Nanshan District, Shenzhen City
  • Shenzhen
  • China
  • 518052
  • dscott2025@163.com
  • 15814636282

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • In Memoria Futuri SAS
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901