Features: 1. Using DC12V or DC 24V motor, low noise and high speed. It has good sealing performance and uses multiple seals to prevent leakage and prolong service life. 2. 2. The stainless steel shell increases the thickness of the shell, makes the shell stronger, not easy to deform, and can effectively prevent the shell from rust and rot. 3. 3. There is a stainless steel filter in the bottom filter of the oil well pump to make the pumped diesel oil (or water) cleaner. The bottom filter is equipped with a threaded interface for easy disassembly, maintenance and replacement. Can achieve the purpose of repeated use. 4. 4. There is a midway switch on the power cord, which is easy to operate. The oil output is about 12L/min. After use, the oil well pump should be removed from the oil (or water) in time. When pumping oil, first connect the self-provided oil outlet hose, and then fully pour the entire oil into clean oil (or water). 5. 5. Lightweight, easy to install and carry. Specification: The portable submersible oil pump has stable performance, is completely sealed and insulated. Lightweight, easy to install and carry. The wire is 3 meters long and the pump port diameter is 16 mm. Suitable for large harvesters, agricultural machinery, construction machinery, large wheeled tractors, etc. PackageList: Multifunctional electric oil pump x 1 Note: 1. When the diesel pump is working, first of all, put the clean diesel pump into the diesel engine bucket to avoid no-load operation. 2. The pump is used for corrosion protection, not for transporting chemical liquids. It is strictly forbidden to transport gasoline, alcohol and other flammable liquids. 3. Pumps for diesel, kerosene and water. It is prohibited to transport gasoline, alcohol and other flammable liquids. 4. Correctly connect the positive and negative poles of the power supply. When using liquid, it must be completely immersed in the bottom of the pump. Continuous working time does not exceed 30 minutes.