The XL6009 is a 4A switching current boost (BOOST) module. The module uses high-frequency switching technology XL6009E1 as the core chip, the performance is superior to LM2577. The XL6009 boost module is less expensive and performs better, and the LM2577 module is about to be phased out. Ultra-wide input voltage 3V~32V, zui good working voltage range is 5~32V; Ultra-wide output voltage 5V~35V; Built-in 4A high efficiency MOSFET switch tube, the efficiency is up to 94%; (LM2577 current is only 3A) The switching frequency is 400KHz, which can achieve very good results with a small-capacity filter capacitor. The ripple is smaller and the volume is smaller. (LM2577 frequency is only 50KHz)Technical Parameters:Model specificationXL6009 boost moduleModular natureNon-isolated boost (BOOST)Rectification methodAsynchronous rectifierInput range3V~32VOutput range5V~35VInput Current4A (maximum ), no load 18mA (5V input, 8V output,no load less than 18mA. The higher the voltage,the greater the no-load current.)Conversion efficiency<94%(the greater the pressure difference,the lower the efficiency)On-off level400KHzOutput ripple50mV(the higher the voltage,the larger the current,the larger the ripple)Hello Elena0.5%Voltage regulation0.5%Operating temperature-40C~ +85CDimensions 43mm * 21mm (L*W)IN+ input positiveIN- input negativeOUT+ output positiveOUT-output negative! Test comparison sample reference:Input 5V output 12V 0.8A 9.6WInput 7.4V output 12V 1.5A 18WInput 12V output 15V 2A 30WInput 12V output 16V 2A 32WInput 12V output 18V 1.6A 28.8WInput 12V output 19V 1.5A 28.5WInput 12V output 24V 1 A 24WInput 3V output 12V 0.4A 4.8W Vin*Iin* efficiency = Vout*Iout Vin: input voltageIin: Input currentVout: output voltageIout: output current