DIY Soldering Learning Kit LED Shell Flow Light Kit SMD SMT Learner Solder Kit for Electronic Soldering Practice

Working current: 0.5mA@3V (All lights are on) 0.19mA@3V (One light is on) Maximum current: 1.5mA@3V (At startup) Sleep mode current: 0.4uA@3V LED display refresh rate: around 245Hz PCB size: 38.5mm x 50.6mm Six types of light speeds Short press KEY1 to switch the speed of the light change. There are six gears for the speed change, which are: 1000ms, 500ms, 100ms, 50ms, 20ms, 10ms The speed changes from high to low with each press of the button, and there is a power down saving function Display of seven lighting modes: Short press KEY1 twice in a row to switch modes, with a total of seven modes and a power failure saving function Mode 1: Switching between D1-D10 in sequence Mode 2: Switching between D1-D10 in sequence, and then switching between D10-D1 in sequence Mode 3: Red light (D1D4D7D10), green light (D2D5D8), blue light (D3 D6 D9) switch in sequence Mode 4: The red light (D10) is always on, and D9-D1 switches sequentially Mode 5: Three lights D1-D10 light up simultaneously and switch sequentially Mode 6: Switching between D1-D10 in sequence, switching to the last light that stays on and stays on in sequence Mode 7: Six modes. Each mode is displayed twice and then switched sequentially It's DIY kits, needs to finish by yourself. Color: As Shown Material: Plastic+Metal Package Contents: 1 * LED Shell Flow Light Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.