ESP32-C3 SuperMini V2 Plus Development Board ESP32 C3 Mini WiFi Bluetooth IOT Board Antenna RGB for

‏26.95 ₪
+ ‏13.99 ₪ משלוח

ESP32-C3 SuperMini V2 Plus Development Board ESP32 C3 Mini WiFi Bluetooth IOT Board Antenna RGB for

  • מותג: Unbranded

ESP32-C3 SuperMini V2 Plus Development Board ESP32 C3 Mini WiFi Bluetooth IOT Board Antenna RGB for

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏30.95 ₪
מחיר: ‏26.95 ₪
החיסכון שלכם: ‏4.00 ₪ (12%)
נמכר על ידי:
‏26.95 ₪
+ ‏13.99 ₪ משלוח

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

ESP32-C3 SuperMini V2 is an IoT mini development board based on ESP32-C3 WiFi/Bluetooth dual-mode chip. It has excellent RF performance and supports IEEE 802.11 b/g WiFi and Bluetooth 5 (LE) protocols.Onboard antenna interface and RGB module. It also has a small and exquisite appearance combined with a single-sided mount design.It supports UART, I2C and SPI and other four serial interfaces. There is also a small reset button and a bootloader mode button on the board. ESP32C3SuperMini is a high-performance, low-power, cost-effective IoT mini development board suitable for low-power IoT applications and wireless wearable applications. If external power supply is required, just connect the external power supply + level to the 5V position and GND to the negative pole. (Support 3.3-6V power supply). Remember that when connecting the external power supply, you cannot connect to the USB. Only one of USB and external power supply can be . NOTE: Enter download mode: Press and hold the BOOT button of ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this time, ESP32C3 will enter download mode. (You need to re-enter download mode every time you connect. Sometimes you press it once, the port will be unstable and disconnected. You can judge it by the port recognition sound) The esp32c3supermini serial port cannot print. Solution: In the for environment, remember to turn on cdc on boot when using direct USB connection, and remember to turn off cdc on boot when using USB to serial port. Colour:Black Material:PCB Package Contents: 1x unsoldered development board 2x pin headers (pin header colors are random,don't accept the specified color) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • מזהה Fruugo: 321102961-712732118
  • EAN: 4711081797715

משלוחים והחזרות

שילוח תוך 3 ימים

  • STANDARD: ‏13.99 ₪ - משלוח בין יום ו׳ 03 אוקטובר 2025–יום ג׳ 14 אוקטובר 2025

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • shen zhen shi yi qu wan ju you xian gong si
  • Shen Zhen Shi Yi Qu Wan Ju You Xian Gong Si
  • long gang qu bu ji jie dao bu ji yi cun long xiang hua yuan C12 dong 803 shi
  • Shenzhen
  • China
  • 518000
  • pueplelris@outlook.com
  • 13392015041

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • 0utong?GmbH
  • 0utong GmbH
  • Brehmstr, 56,40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698