Product Description: With ezcap241 Music Digitizer, you can easily convert your old analog music to MP3 without computer saving to USB drive or SD card, it can automatically split every song of all music. feature: 1. Power supply - 5V DV power supply using a USB mini 5-pin cable 2. SD card slot - insert SD card to save recording files. 3. USB OTG Insert a USB flash drive to save the recording file. 4. LINE OUT - Connect speakers or headphones to monitor the music being played. 5. LINE IN Use a 3.5mm audio cable to connect audio sources (phones, tape players, etc.) 6. RCA INPUT Use RCA cables to connect audio sources (LP players, DVD players, set-top boxes, etc.) 7. Infrared receiver 8. LEDs Green LED (manual mode) always on---standby Fast flashing---recording slow flashing---playback Switch to automatic mode, the LED turns blue, and the status is the same as above. 9 Record button Press to record, press again to stop. Record The ezcap241 is powered with 5V DC (most USB ports provide 5V DC), use a 3.5mm cable or RCA cable to connect the audio source to the line in, you can plug headphones into the line out port to listen to the input audio. Insert a USB stick or SD card (not both), make sure they are in FAT32 (FAT) or exFAT format (NTFS is not supported). It is best to format the storage before using it on ezcap241 and keep the storage close to empty, otherwise it will cause recording errors. Now ezcap241 is in standby mode (green indicator light is always on), the indicator color is green, the default manual mode. Just press the record button of the box, or the button of the remote, and the device will start recording (converting) the music being played to MP3 format, the green light will flash quickly (if not, it means not recording, reinsert your USB flash and try again). Press the record button again to stop recording and save the MP3 file on the USB drive. In the interval between two songs to save to another file, short press the NEXT key of the remote control, the flashing green indicator light will be off for about 2 seconds, then flash again quickly to save to another file. The device will create a new folder named "TAPEMP3" in your USB stick and save each MP3 name as "FV0001 to FV9999". If you want to do it in auto mode, just press and hold the NEXT button for 3~5 seconds in standby mode until you see the indicator light change from green to blue. In automatic mode, ezcap241 will detect every interval between two songs and save them in two files. If you want to switch from automatic mode back to manual mode, stop recording (or playback) to standby mode (blue indicator light is always on), press and hold the NEXT button for 3~5 seconds until you see the indicator light from blue Turn green, or simply turn off ezcap241, then reboot, it will load by default----manual mode. Note: For better recording (and for better splitting in auto mode), please turn up the volume of the audio source high enough. Playback: The device has playback capabilities so you can easily view recorded files. In standby mode, press the play button, the device starts to play the music being recorded, and the indicator light flashes slowly. Pressing the play button again will stop playback and return to standby mode. During playback, use the Up/Down buttons to select the previous or next file to play. Use the volume up buttons to set the volume up and down. You can also copy other MP3 files to a USB stick and insert it into our device to play, but only the files in the "TAPEMP3" folder can be played. feature 1. Package Contents 2. Independent, no computer required. 3. Automatic partitioning. 4. By playing, you can view the music recorded on the device. 5. With remote control, you can get all the functions. 6. Mini USB power supply. 7. With 3.5mm and 2 RCA audio input options. 8.ezcap241 music digitizer, USB cable (for power supply), remote control, manual, 3.5mm cable 9.5V/1A USB power adapter (optional), earphone (optional) Specification 1. Storage medium 2. U disk, SD card 3. Audio input 4. 3.5mm audio, 2 RCA L/R audio 5. Audio output 6. 3.5mm audio 7. Converter Format 8. MP3 9. Bit rate 10.128Kbps 11. User Interface 12.Record button, IR remote control, working status LED Size: 66(L)62(W)23(H)mm 2. Net weight: 52g Power supply: Mini USB port power supply (5V DC adapter, PC side USB) Note: Please do not press the remote control buttons in rapid succession, otherwise it will cause malfunction. You can download Audacity audio editing software to edit your recorded files. please go to the link