for ESP32 S3 Development Board with 1.28 Inch IPS Round Touch LCD Screen Accelerometer and Gyroscope Sensor 26-27

1、[for ESP32 S3 Development Board] Equipped with 32 bit LX7 dual core processor, running at up to 240 MHz; Supports 2.4 GHz WiFi (802.11 b g n) and BLE 5, with onboard antenna. 2、[Expansive Memory Capacity] Comes with 512KB of Static RAM and 384KB of ROM, stacked with 2MB of PSRAM and external 16MB Flash; Features Type C interface for easy plug in without worrying about orientation. 3、[Onboard Features] Features a 1.28 inch capacitive touch LCD screen with 240x240 resolution and 65K colors; Includes QMI8658 six axes inertial measurement unit (3 axes acceleration, 3 axes gyroscope) for detecting motion postures. 4、[Versatile Connectivity] Supports 3.7V lithium battery charging discharge interface and SH1.0 connector with 6 GPIO pins; Supports flexible clock settings and accurate power control for various low power modes. 5、[Integrated USB Serial Controller] Integrated USB serial port full speed controller, GPIO can flexibly configure peripheral functions. Item Type: for ESP32 S3 Development Board Material: LCD, Metal LCD Parameters: Touch Chip: CST816S Touch Interface: I2C Display Chip: GC9A01A Display Interface: SPI Resolution: 240(H)RGB x 240(V) Display Panel: IPS Pixel Size: 0.135(H) x 0.135(V)mm IMU Parameters: Sensor Name: QMI8658 Accelerometer Features: Resolution: 16 bits Gyroscope Features: Resolution: 16 bits 1 x Development Board with LCD Display 1 x Cable 1 x Screwdriver Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YUNYUNC Shop